Hem/Produkter/KTM modell VPort kulventil

KTM modell VPort kulventil

Har du några frågor?

Bernhard Witzelsteiner
Account Manager
Mob. 070 378 83 35

Bernhard.Witzelsteiner@askalon.se

Fredrik Ekeroth
Solution Seller
Tel. 054-57 92 06

Fredrik.Ekeroth@askalon.se

Fredrik Malmström
Solution Seller
Tel. 040-33 02 33

Fredrik.Malmstrom@askalon.se

Johan Riedenlow
Account Manager
Tel. 040-33 02 30

Johan.Riedenlow@askalon.se

KTM™ modell VPort är en robust, långlivad V-port kulventil med reglerfunktion. Den har utmärkta flödesegenskaper för olika vätskor inklusive slurry och fibrer.

KTM PAPPER & CELLULOSA SLITANDE MEDIA

Specifikationer
Funktioner

Critical Service	Corrosive, General Service
Flow Characteristics	Equal percentage
Material	316 Stainless Steel, 304 Stainless Steel, Stainless Steel
Operating Temperature	High Temperature, High Temperature (>250F)
Pressure Class	ASME
Shutoff Class	Class II (FCI 70-2), Class IV (FCI 70-2)
Valve Size	NPS 1 / DN 25, NPS 1-1/2 / DN 40, NPS 12 / DN 300, NPS 14 / DN 350, NPS 16 / DN 400, NPS 18 / DN 450, NPS 2 / DN 50, NPS 3 / DN 80, NPS 4 / DN 100, NPS 6 / DN 150, NPS 8 / DN 200, NPS 20 / DN 500
Valve Size Standard	NPS, DN
Valve Type	Trunnion Ball Valve, Ball Valve, Ball, Automated Ball Valve
Certifications	PED, Lloyd's Register, CE
End Connection	Flanged

Rotary-valve design provides shearing action between the V-notch ball and the seat, promoting a smooth, non-clogging operation.
Straight-through flow design provides high capacity for fluids.
With a single-seat design, torque is lower than typical trunnion design valves, for ease of operation and reduced actuator cost.
Two seat designs:<ul><li>Laminated seat provides ASME/FCI 70-2 class IV shut-off and withstands tough operating conditions.</li><li>Thick (solid) seat for high-velocity and abrasive or erosive service.</li></ul>
Segmented, V-notched ball features high rangeability and smooth throttling action.
Choice of full and reduced port, providing the right flow capacity for every application at low cost.
Machined ISO 5211 top mounting flange (VA series only).
Heavy-duty, stainless steel shaft for high strength and rigidity.
Multiple, adjustable ring packing allows easy adjustment without valve disassembly or actuator removal.
Shaft bearings assure a durability, smooth and easy valve operation.
Positive alignment of split body.
The spline connection minimizes the backlash of shaft and disk. It results excellent control performance.

Varumärken

KTM modell VPort kulventil

Frågor på produkten?

Varumärken

KTM modell V­Port kulventil

Frågor på produkten?

KTM modell VPort kulventil