Home/Products/Fisher Vee-Ball V150S Flanged Control Valve

Fisher Vee-Ball V150S Flanged Control Valve

Any questions?

Andreas Christoffersen
Account Manager
Phone. +46 54-52 46 18

Andreas.Christoffersen@askalon.se

Erik Rune
Solution Seller
Phone. +46 54-57 92 31

Erik.Rune@askalon.se

Niklas Pettersson
Account Manager
Phone. +46 54-57 92 09

Niklas.Pettersson@askalon.se

Rickard Andersson
Account Manager
Phone. +46 40-33 02 34

Rickard.Andersson@askalon.se

Klaus Bergmann
Area Account Manager East & West
Phone. +45 2112 3345

Klaus.Bergmann@askalon.dk

Peder Hvidberg
Area Account Manager West
Phone. +45 2178 5053

Peder.Hvidberg@askalon.dk

Pekka Immonen
Key Account Manager
Mob. +358 45 168 8355

Pekka.Immonen@askalon.fi

Taneli Luhanko
Inside Sales Engineer
Phone. +358 207 416 202
Mob. +358 40 757 4208

Taneli.Luhanko@askalon.fi

The Fisher™ Vee-Ball™ V150S control valve offers a rugged construction, highly wear-resistant trim materials, and an unrestricted straight through flow path which makes this valve ideal for controlling the most abrasive of slurries. The design is particularly effective in minimizing erosive damage to the adjoining pipework, thereby providing greater operational safety and service life.

CHEMICAL & PETROCHEMICAL Fisher MINING & STEEL OXYGEN PULP & PAPER SLURRY

Specifications
Features

Certifications	ATEX, CUTR, PED, CRN, Fugitive Emission, NACE
Critical Service	Dirty Service, Erosive, General Service
Flow Characteristics	Equal Percentage
Material	Carbon Steel
Operating Temperature	Standard Temperature
Pressure Class	ASME
Process Connection Type	Flanged
Shutoff Class	Class I (FCI 70-2)
Valve Size	NPS 3, NPS 4, NPS 6, NPS 8, NPS 10, NPS 12
Valve Size Standard	NPS

The valve body, shaft, and bearings are fully protected by hard wear-resistant trim materials.
The throttled flow stream is guided through a specially shaped flow ring to minimize turbulence and impingement on the pipe wall.
When used in reverse flow mode, it keeps the high velocity down stream of the vena contracta within the flow ring bore at the outlet of the valve. Compared with other styles of valves, the exit flow is essentially parallel with the flow ring wall and a minimum of flow impingement occurs.
Full flanging on the valve body allows the valve body to be easily aligned centrally with the pipe flanges, an essential requirement in avoiding erosion across the flange faces.
Precise contouring of the V-notch ball provides a modified equal percentage flow characteristic.
The valve body, complete with flanges, is made from a one-piece casting. No welding is employed

Brands

Fisher Vee-Ball V150S Flanged Control Valve

Questions about the product?